HP StorageWorks Business Copy XP user guide for the XP128/XP1024 (December 2005)

62 Business Copy XP (BC) for the XP128/XP1024
104E The volume specified as a Reserve volume is being
used as a CA P-VOL.
Delete the Continuous Access XP pair.
104F The volume specified as a Reserve volume is being
used as a CA S-VOL.
Delete the Continuous Access XP pair.
1050 The specified P-VOL and S-VOL are not a BC pair. Check the pair status.
1051 The volume numbers of the specified P-VOL and
S-VOL are the same.
Retry after refreshing the screen.
1053 Request could not be accepted Confirm a matching condition.
1054 Request could not be accepted Confirm a matching condition.
1058 S-VOL is node volume whose L2 status is SP-Pend. Confirm a matching condition.
1070 The status mode specification (status modec) in the
Status Check command is incorrect.
Call HP technical support for assistance.
1071 The status classification (statusindc) in the Status
Check command is incorrect.
Call HP technical support for assistance.
1072 The CU number specified by the Status Check
command (volume status) does not exist.
Call HP technical support for assistance.
1084 Volume was used for reserve volume of Auto LUN
XP.
Check the volume, or cancel the reserve volume of
HIHSM.
1085 P-VOL was used for reserve volume of Auto LUN XP. Check the P-VOL, or cancel the reserve volume of
HIHSM.
1086 S-VOL was used for reserve volume of Auto LUN
XP.
Check the S-VOL, or cancel the reserve volume of
HIHSM.
1087 P-VOL is used as source volume for Auto LUN XP. Confirm a matching condition.
1095 Request could not be accepted because status of
pair who shared with P-VOL was Reverse-copy.
Confirm a matching condition.
1096 Request could not be accepted because L1 pair
status was Reverse-copy.
Confirm a matching condition.
1097 Request could not be accepted because L2 pair
status was Reverse-copy.
Confirm a matching condition.
1098 Reverse-Copy could not be accepted because pair
status was not Split.
Confirm a matching condition.
1099 Reverse-copy to L2 pair could not be accepted
because status of pair who shared with P-VOL was
neither Split nor Suspend.
Confirm a matching condition.
109A Reverse-copy could not be accepted because
P-VOL was shared with CA P-VOL whose status was
not Suspend.
Confirm a matching condition.
109B Reverse-copy could not be accepted because
P-VOL was shared with CA S-VOL whose status was
not Suspend.
Confirm a matching condition.
109C Reverse-copy could not be accepted because
S-VOL was shared with CA P-VOL.
Confirm a matching condition.
Error
Code
Description Corrective Action