HP StorageWorks Business Copy XP user guide for the XP128/XP1024 (December 2005)

Business Copy XP user guide for the XP128/XP1024 61
1026 It is impossible to make a pair any more because
the volume that was specified as P-VOL is root
volume already.
Delete some of the pairs of root volume.
1027 It is impossible to make a pair any more because
the volume that was specified as P-VOL is node
volume already.
Delete some of the pairs of node volume.
1028 It is impossible to make a pair because the volume
that was specified as P-VOL is leaf volume already.
Confirm a pair condition.
1029 It is impossible to make a pair because the volume
that was specified as S-VOL is leaf volume already.
Confirm a pair condition.
102E P-VOL is used as source volume for HIHSM. Confirm a matching condition.
102F P-VOL is used as destination volume for HIHSM. Confirm a matching condition.
1030 The specified P-VOL number does not exist. Retry after refreshing the screen.
1031 The specified P-VOL has been set as a Reserve
volume.
Check pair status.
1032 No more pairs can be created for the specified
P-VOL.
Delete any pairs formed by the P-VOL.
1033 The specified P-VOL is not really a P-VOL. Check pair status.
1037 The specified P-VOL has been set as a BC S-VOL. Check pair status.
103A The Pairresync command was issued to a device in
the SMPL status.
Check pair status.
103B It is impossible to make a pair because volume that
was specified as S-VOL is root volume already.
Confirm a pair condition.
103C It is impossible to make a pair because volume that
was specified as S-VOL is node volume already.
Confirm a pair condition.
103D It is impossible for L2 pair to require a split
because L1 pair is not in the split condition.
After making L1 pair a split condition, re-execute.
103E A new pair was created with a P-VOL forming the
CA cooperation pattern.
Place the BC pair in SMPL status, or place the
Continuous Access XP pair that uses the BC S-VOL
as a P-VOL in SMPL status.
103F A pair status cannot be changed to form the CA
cooperation pattern.
Place the Continuous Access XP pair that uses the
BC S-VOL as a P-VOL in PSUE or SMPL status.
1040 The specified S-VOL does not exist. Set one or more Reserve volumes.
1042 S-VOL is used as destination volume for Auto LUN
XP.
Confirm a matching condition.
1043 The specified S-VOL number has already been
used as that of an S-VOL.
Check pair status.
1044 The specified S-VOL is not a BC S-VOL. Check pair status.
1046 The specified secondary volume is being used as a
CA P-VOL.
Delete the Continuous Access XP pair.
1047 The specified secondary volume is being used as a
CA S-VOL.
Delete the Continuous Access XP pair.
104A The specified secondary volume is being used as a
BC P-VOL.
Check the pair status.
104B S-VOL is used as source volume for Auto LUN XP. Confirm a matching condition.
Error
Code
Description Corrective Action