HP StorageWorks Business Copy XP User Guide for the XP10000/XP12000 (T1713-96002, December 2005)

Business Copy XP user guide for the XP10000/XP12000 67
Resynchronizing BC pairs (Pairresync)
The Pairresync window displays pair information for pairs selected on the BC main screen. Use the
Pairresync window to resynchronize pairs. To open the Pairresync window, select one or more PSUS or
PSUE pairs in the Volume list on the BC main screen, right-click the selected pair, and select Pairresync.
Figure 36 Pairresync window
The Pairresync window consists of the following components.
Pairresync Volume List
The Volume List located on the upper side of the Pairresync window displays the following information
about the P-VOL and S-VOL of the pair you want to resynchronize:
• Port: Port ID (cluster and channel number) of the P-VOL
• Group (G-ID): Host group ID of the P-VOL
• (Path) LUN: CU:LDEV of the P-VOL
NOTE: An LDEV number ending with # (for example, 00:01#) indicates the LDEV is an external
volume.
• MU: MU number of the P-VOL
• Status: Status of the P-VOL
• Port: Port ID (cluster and channel number) of the first S-VOL of each volume pair
• Group (G-ID): Host group ID of the S-VOL
• SvolMode (LUN(S)): CU:LDEV of the S-VOL
NOTE: An LDEV number ending with # (for example, 00:01#)indicates the LDEV is an external
volume.
• Type: Emulation type of the P-VOL and S-VOL
• Capacity (MB): Volume capacity displayed in megabytes (MB)
• CLPR(P): Cache logical partition of the P-VOL
• CLPR(S): Cache logical partition of the S-VOL
Window options
• Use the Resync Type list to select the pairresync type for pairs being resynchronized (Normal Copy,
Quick Resync, Reverse Copy, or Quick Restore).