HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

LUN Security XP Extension Function66
Table 23 Detailed Information for Attribute Operation
Expiration Lock Operation
[LSE]
LUN Security Extension function
Expiration Lock
Expiration Lock operation
SLPR#xx:Enable
Item Description
CU:LDEV The CU number and the LDEV number of the logical volume where the attribute is set.
Attribute The set attribute in hexadecimal. Each bit (0-7) of 1 byte corresponds to the setting item.1
is assigned to each bit when the setting is enabled and 0 (zero) is assigned to each bit
when the setting is disabled. Each bit represents the following attributes:
Bit 0: Mounting of LEDV (fixed to 1)
Bit 1: Setting of S-VOL Disable
Bit 2: Setting of Zero Read Cap mode
Bit 3: Setting of Invisible mode
Bit 4: Setting of reserve
Bit 5: Fixed to 0 (zero)*
Bit 6: Setting of Read Only attribute*
Bit 7: Setting of Protect attribute*
When 0x88 is output to the attribute, for example, Read/Write attribute is set to the
logical volume to show that the reserve setting has been enabled.
Result The result of operation.
Normal end: Normal end
Error(xxxx-yyyyy): Abnormal end
xxxx: Part code
yyyyy: Error code
Num. of LDEVs The number of the logical volume(s) where the attribute has been set.
* When bit 5, 6, and 7 are all 0 (zero), Read/Write has been set.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LSE],Expiration
Lock,SLPR#xx:Enable,
Normal end,Seq.=xxxxx