HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Audit Log Reference Guide 47
Table 10 Detailed Information for Set Syslog Server Info Operation
Set System Info Operation
[Base]
BASE function
Set System Info
Set System Information operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shownDetailed information for this operation is shown
in Table 11.
Item Description
DetailFlg Indicates whether to output detailed information to the syslog server.
Enable: Output detailed information. Disable: Do not output detailed information.
Locationinfo The location identification information of the disk subsystem.
ServerType The syslog server to which syslog information is output.
Primary: Primary syslog server. Secondary: Secondary syslog server.
IPAddrVer Version number of the internet protocol. A hyphen (-) is displayed if you do not change
the setting.
IPv6: Internet Protocol Version 6 (not supported). IPv4: Internet Protocol Version 4
OutFlg Indicates whether to transfer the syslog information to the syslog server. A hyphen (-) is
displayed if you do not change the setting.
Enable: Transfer syslog information. Disable: Do not transfer syslog information.
ServAddr The IP address to which the syslog information is sent. A hyphen (-) is displayed if you do
not change the setting.
ServPortNum The port number of the LAN when sending the syslog information. A hyphen (-) is
displayed if you do not change the setting.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[BASE],Set System
Info,,Normal end,Seq.=xxxxxx
+{Name,Contact,Location}=[{xxxx,xxxx,xxxx}],Num. of SystemInfo=1