HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Auto LUN (ALUN) Function232
Set Migration Vol Operation
[ALUN]
Auto LUN function
Set Migration Vol
Set Migration Vol operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 172.
Table 172 Detailed Information for Set Migration Vol Operation]
PG The ID of the parity group whose setting has been changed.
Num. of PGs
The number of parity groups whose setting has been changed.
Item Description
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[ALUN],Set Migration
Vol,,Normal end,Seq.=xxxxxx
+{Instruction,SourceLDEV,TargetLDEV,OwnerID,Result}=[{Create,0x00:0x00,0x00
:0x01,0xFF,
Normal end},{ Create,0x00:0x02,0x00:0x03,0xFF, Error(XXXX-YYYY) end },{
Create,0x00:0x04,
0x00:0x05,0xFF,Normal end},{ Create,0x00:0x06,0x00:0x07,0xFF,
Error(XXXX-YYYY) end }]
Num. of LDEVs =4
Item Description
Instruction
Indicates that the manual migration plan is set or deleted; Create: Set, Delete:
Deleted
SourceLDEV The logical volume ID of the migration source. The number before the colon is a CU
number and that after the colon is an LDEV number.
TargetLDEV
The logical volume ID of the migration target. The number before the colon is a
CU number and that after the colon is an LDEV number. This value is output only
when the manual migration plan is set.