HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Audit Log Reference Guide 209
28 External Storage XP Function
Add-Lu2 Operation
[EXS]
External Storage function
Add-Lu2
Add-Lu2 operation (add logical unit)
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 153.
Table 153 Detailed Information for Add-Lu2 Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[EXS],Add-Lu2,,Normal
end,Seq.=xxxxxx
+{Vendor,Product,Serial,Dev,Dev-Name,D-Type,Capa(blocks),Group,IOSup,CM,CLP
R,Type, UsedCapa(blocks),Result}=
{{HITACHI,9970V,28528,0001,DF600,0x0000,4294967296,E1-1,Enable,Disable,0,OP
EN-V, 4294967296, Normal end},
++{CU:LDEV,Capa(MB),SSID}={0x03:0x00,3287040,0x20},Num. of LDEVs=xxx
++{Port,WWN,LUN}=[{1A,50060E8000C3E214,0x0001},{3A,-,0x0000},{7B,-,0x0000},
{7B,-,0x0000},
{1A,-,0x0000},{3A,-,0x0000},{7B,-,0x0000},{7B,-,0x000}],
+Num. of Groups=xxx
Item Description
Vendor The vendor name of the external subsystem with the mapped external volume.
Product The product name.
Serial The serial number of the external subsystem with the mapped external volume.
Dev The device identification number of the mapped external volume.
Dev-Name The device name of the mapped external volume.