HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Universal Replicator (UR) z/OS Function206
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 151.
Table 151 Detailed Information for Suspend-Pair Operation
Parameter Description
P-VOL(CU:LDEV) The CU and LDEV numbers of the primary data volume.
S-VOL(CU:LDEV) The CU and LDEV numbers of the secondary data volume.
MirrorID The mirror ID.
S/N The serial number of the device (disk subsystem).
CTRLID The controller ID.
Type Indicates whether the split data volume is a primary or secondary data volume.
P-VOL: Primary, S-VOL: Secondary
S-VOL Write Indicates whether writing to the secondary volume is enabled or not.
Disable: Disabled, Enable: Enabled
Range The range to restore the pair.
Group: Group range, Volume: Volume range
Suspend Mode The suspend mode.
Purge: Purge mode, Flush: Flush mode
Result The result of operation.
Normal end: Normal end
Error(xxxx-yyyyy): Abnormal end
xxxx: Part code
yyyyy: Error code
Num. of Pairs The number of pairs.