HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Audit Log Reference Guide 177
Table 124 Detailed Information for Change CTG Option Operation
Change Option Operation
[TC z/OS]
TrueCopy z/OS function (for IBM z/OS)
Change Option
Change Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 125.
Item Description
CTG The consistency group number of the consistency group (CT group) that the option is
changed.
Offloading(min.) The value set to the offloading timer of the sidefile. The unit is minute.
Inflow Control Indicates whether the inflow control to the cache is enabled or disabled.
Enable: Setting is enabled, Disable: Setting is disabled
Copy Pending(min.) The setting value for Time Out (Copy Pending). The unit is minute. When Time Out (Copy
Pending) is set to 0 (zero), 'None' is output.
RCU Ready(min.) The setting value for Time Out (RCU ready). The unit is minute. When Time Out (RCU
ready) is set to 0 (zero), 'None' is output.
Timer Type The timer type set.
System: System timer, Local: Local timer, None: No timer (system timer)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[TC z/OS(R)],Change
Option,,Normal end,Seq.=xxxxxx
+{ Max Initial Copy,Path Blockade Watch(s),Path Blockade SIM Watch(s)
}={128,45,70}
+{CU,Service SIM,PPRC Support,SCP Delay Time(s)}=
-{0x00,Not Report,Yes,600},{0x01,Not Report,Yes,600},{0x02,Not
Report,Yes,600},
{0x03,Not Report,Yes,600},{0x04,Not Report,Yes,600},(snip)
-(snip), Num.of CUs=64