HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Audit Log Reference Guide 171
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 120.
Table 120 Detailed Information for Pairsplit-S Operation
Start Pair Operation
[CAXP]
Continuous Access XP function
Start Pair
Start Pair operation
Item Description
P-VOL(Port-G-ID-LUN) The port number, host group number and LUN of the primary volume in the restored pair
sequentially.
S-VOL(Port-G-ID-LUN) The port number, host group number and LUN of the secondary volume in the restored
pair sequentially.
Type The volume type of the volume on the primary site.
P-VOL: Primary volume, S-VOL: Secondary volume
Force The setting content of forced pair deletion.
Yes: Pair is deleted even when MCU cannot communicate with RCU
No: Pair is deleted when MCU can change the pair status to SMPL only
Range The delete range set. This value is output when the asynchronous pair is deleted only.
Group: Group (all asynchronous pairs in the consistency group),
CT: C/T (asynchronous pairs which the consistency status of the consistency group is
group and the pair status is PSUE)
LU: LU (specified asynchronous pairs only)
Result The result of operation.
Normal end: Normal end
Error(xxxx-yyyyy): Abnormal end
xxxx: Part code
yyyyy: Error code
Num. of Pairs The number of deleted pairs.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[CAXP], Start Pair,,Normal
end,Seq.=xxxxxx