HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Continuous Access XP Function168
Pairresync Operation
[CAXP]
Continuous Access XP function
Pairresync
Pairresync operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 118.
Table 118 Detailed Information for Paircreate Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[CAXP],Pairresync,,Normal
end,Seq.=xxxxxx
+{P-VOL(Port-G-ID-LUN), S-VOL(Port-G-ID-LUN),Fence Level,Copy
Pace,Priority,Range, Error Level,Result}=
-{1A-0x00-0x000, 1B-0x00-0x000,Never,15,256,Group,Group,Normal End},
{1A-0x00-0x001,Never,15,256,Group,Group,Normal End},(snip)
-(snip), Num. of Pairs=xx
Item Description
P-VOL(Port-G-ID-LUN) The port number, host group number and LUN of the primary volume in the restored pair
sequentially.
S-VOL(Port-G-ID-LUN) The port number, host group number and LUN of the secondary volume in the restored
pair sequentially.
Fence Level The fence level set (the condition that MCU rejects Write to the primary volume).
Never: No condition, Data: S-VOL data, Status: S-VOL status
Copy Pace The initial copy speed set (the number of tracks you can copy at a time).
Priority The priority of restoring operation set (scheduling order).
Range The resume range set (the range to restore the asynchronous pair). This value is output
when the asynchronous pair is restored only.
Group: Group (all asynchronous pairs in the consistency group),
LU: LU (appropriate asynchronous pair only)