HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Audit Log Reference Guide 157
Update PPCGrp Operation
[PFC]
Performance Control function
Update PPCGrp
Update PPCGrp operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 109.
Table 109 Detailed Information for Update PPCGrp Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[PFC],Update PPCGrp,,Normal
end,Seq.=xxxxx
+{UpdateMode, Group,Priority,Upper Limit,Mode}=[{Add
WWN,XXXXXXXXXXXXXXXX,Non-Prio,
XXXXXXXX,IOPS},
++WWN=[0xXXXXXXXXXXXXXXXX,0xXXXXXXXXXXXXXXXX],Num. of WWNs=2],
+Num. of PPC Group=1
Item Description
UpdateMode The operation executed.
Add New Group: Creation of an SPM group
Add WWN: Addition of the host bus adapter to the SPM group
Delete WWN: Deletion of the host bus adapter from the SPM group
PPC Group The SPM group name.
Priority The attribute of the SPM group.
Prio: Prioritized WWN, Non-Prio: Non-prioritized WWN
This attribute is applied to all host bus adapters that belong to this SPM group.
This value is output only when the SPM group is created.
Upper Limit The upper limit value applied to the host bus adapters belonging to this SPM group when
the attribute of the SPM group is Non-Prio.
This value is output only when the SPM group is created.