HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Performance Control Function152
Set All Prio Port operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 103.
Table 103 Detailed Information for Set All Prio Port Operation
Set All Prio WWN Operation
[PFC]
Performance Control function
Set All Prio WWN
Set All Prio WWN operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 104.
Item Description
AllPriority The setting status of the All Thresholds value in the port tab.
Enable: All Thresholds value is set
Disable: All Thresholds value is cancelled
Threshold The All Thresholds value set.
This value is output only when the All Thresholds value is set.
Mode The All Thresholds value set.
This value is output only when the All Thresholds value is set.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[PFC],Set All Prio WWN,,Normal
end,Seq.=xxxxx
+{AllPriority,Threshold,Mode}={Enable,XXXXXXXX,IOPS}