HP Hitachi Universal Replicator for Mainframe User Guide (T5278-96044, November 2011)

Table 12 (page 52) lists the volumes and the volume capacity that can be used for the Universal
Replicator for Mainframe data volume and journal volume. Remember that the capacity of the
journal volume is not included in the accounting capacity.
Table 12 Supported Data Volume and Journal Volume
Support specificationsType
Journal VolumeData Volume
AvailableVLL volume
UnavailableAvailableThe volume on which Cache Residency
Manager setting are made
2.377 GB3380-3Maximum volume capacity
1.26 GB3380-E
0.63 GB3380-J
1.890 GB3380-K
0.964 GB3390-1
1.892 GB3390-2
2.838 GB3390-3
3390-3R
8.510 GB3390-9
27.80 GB3390-L
55.60 GB3390-M
Capacity of OPEN-V volumes
can be determined freely,
OPEN-V volumes cannot be
used as data volumes.
OPEN-V
depending on the VLL volume
specifications. The minimum
capacity is 48.1 MB, and the
maximum capacity is the same
as the user capacity of one RAID
group.
NOTE: The default capacity of
an OPEN-V volume is the same
as the capacity of a RAID group,
and depends on the hard disk
drive type and the RAID
configuration.
50 cylinders for a non-OPEN-V
volume.
1 cylinderMinimum volume capacity
48.1 MB for an OPEN-V
volume.
NOTE: A journal volume
consists of two types of areas,
one for containing journal data,
and the other for containing
information for managing
remote copy operations.
The table below explains emulation types and the capacity of volumes that can form pairs. For
details on the maximum number of pairs, see the next section.
52 Preparing for Universal Replicator for Mainframe Operations