HP Hitachi TrueCopy for Mainframe User Guide (T5211-96014, November 2011)

Table 70 GDPS TrueCopy for Mainframe-Compatible XRC Matrix (continued)
XP12000/XP10000 Disk
Array
XP24000/XP20000 Disk
Array
IBM 3990-6EzSeries and S/390 Feature
Not Supported. Dual Copy
is not supported by storage
system.
Not Supported. Dual Copy
is not supported by storage
system.
SupportedDual Copy combination
support
Supported.Supported.SupportedTSO command Support
Some additional options
only available via the
Remote Web Console/SVP.
Some additional options
only available via the
Remote Web Console/SVP.
Supported.Supported.SupportedICKDSF command support
Some additional options
only available via the
Remote Web Console/SVP.
Some additional options
only available via the
Remote Web Console/SVP.
SupportedSupportedSupportedP/DAS support
16,384XP24000 Disk Array:
65,536
64Maximum pairs
XP20000 Disk Array:
32,768
8 per logical control unit8 per logical control unit4Maximum paths between
storage systems
1 to 4, default is 4 per LCU.1 to 4, default is 4 per LCU.4Number of copy operations
on initial copy
Requires the Remote Web
Console computer (or SVP)
to change default.
Requires the Remote Web
Console computer (or SVP)
to change default.
Requires main storage
system port to be set to
Requires main storage
system port to be set to
NoDedicated interface between
storage systems
target by the Remote Webtarget by the Remote Web
Console (or SVP) orConsole (or SVP) or
automatically in response toautomatically in response to
establish and delete path
commands.
establish and delete path
commands.
3 or 15, default = 15 tracks3 or 15, default = 15 tracks1-255, default is 15 (setting
of 1 copies a maximum of 3
PACE parameter initial copy
option
tracks at a time, 2-255
copies a maximum of 15
tracks at a time)
R-VOL DataR-VOL DataYesCRITICAL pair error options
(Fence Level parameter)
Never − DefaultNever − DefaultNo − Default
R-VOL StatusR-VOL Status
FREEZE/RUN by logical
controller SSID pair.
FREEZE/RUN by logical
controller SSID pair.
FREEZE/RUN by logical
controller SSID pair
CGROUP
Supported.Supported.SupportedCQUERY
TC-Unique Features
(specified via the Remote
Web Console computer or
SVP)
RCU Options
Default = 1.Default = 1.Not supportedMinimum paths
If the minimum number of
MCU-RCU active paths falls
If the minimum number of
MCU-RCU active paths falls
Overview of PPRC Commands 219