HP Hitachi TrueCopy for Mainframe User Guide (T5211-96014, November 2011)

Table 57 TrueCopy for Mainframe Operations versus PPRC TSO and ICKDSF Commands (continued)
DescriptionCommand
Issued to:
ICKDSF CommandTSO CommandTrueCopy for
Mainframe
Operation
required). TrueCopy for
Mainframe supports the
optional MODE, PACE,
and CRIT parameters. The
MSGREQ parameter
defaults to NO (not
applicable to TrueCopy for
Mainframe Asynchronous).
Suspends a TrueCopy for
Mainframe pair (or
M-VOL or R-VOLPPRCOPY SUSPENDCSUSPENDSuspend Pair
TrueCopy for Mainframe
Asynchronous group).
TrueCopy for Mainframe
supports the optional
PRIMARY parameter. See
CAUTION below on the
QUIESCE parameter.
Releases a TrueCopy for
Mainframe pair (or
M-VOLPPRCOPY DELPAIRCDELPAIRDelete Pair (to MCU)
TrueCopy for Mainframe
Asynchronous group) from
the MCU.
Releases a TrueCopy for
Mainframe pair (or
R-VOLPPRCOPY RECOVERCRECOVERDelete Pair (to RCU)
TrueCopy for Mainframe
Asynchronous group) from
the RCU.
Displays the TrueCopy for
Mainframe and TrueCopy
M-VOL or R-VOLPPRCOPY QUERY/
VOLUME
CQUERY/ VOLUMEDetailed Information
for Mainframe
Asynchronous pair status of
the volume. TrueCopy for
Mainframe supports the
optional
FORMAT/UNFORMAT and
VOLUME/PATHS
parameters.
Resynchronizes a TrueCopy
for Mainframe pair (or
M-VOLPPRCOPY ESTPAIRCESTPAIR (MODE=
RESYNC)
Resume Pair
TrueCopy for Mainframe
Asynchronous group), and
sets the TrueCopy for
Mainframe initial copy
options and pair options.
TrueCopy for Mainframe
supports the optional
MODE, PACE, and CRIT
parameters.
Supported by TrueCopy for
Mainframe Synchronous.
M-VOL and R-VOL—P/DAS SWAP—
Command is rejected by
TrueCopy for Mainframe
Asynchronous pairs.
Redirects application I/Os
190 Using PPRC Commands for TrueCopy for Mainframe