HP Hitachi TrueCopy for Mainframe User Guide (T5211-96014, November 2011)
Table 57 TrueCopy for Mainframe Operations versus PPRC TSO and ICKDSF Commands (continued)
DescriptionCommand
Issued to:
ICKDSF CommandTSO CommandTrueCopy for
Mainframe
Operation
change to RCU target
ports, or vice versa, when
these ports are in
initiator/external mix
mode.
For Fibre Channel
interface, do not use the
CESTPATH and CDELPATH
commands at the same time
as the SCSI path definition
function of LUN Manager.
The Fibre Channel interface
ports need to be configured
as initiator ports or RCU
target ports before the
CESTPATH and CDELPATH
commands are issued.
Establishes logical paths
from an MCU to an RCU.
MCUPPRCOPY ESTPATHCESTPATHAdd RCU
The default RCU options
are used.
Deletes all active paths
between an MCU and an
RCU.
M-VOLPPRCOPY DELPATHCDELPATHDelete RCU
Displays the status of all
paths for the CU specified
MCUPPRCOPY QUERY/
PATHS
CQUERY/PATHSRCU Status
by the DEVN parameter.
TrueCopy for Mainframe
supports the optional
FORMAT/UNFORMAT and
VOLUME/PATHS
parameters.
The default TrueCopy for
Mainframe async options
are used.
MCU/RCU——Async Options
Must be performed using
the TrueCopy for
MCU——Add Group
Mainframe software. The
group options are selected
during add group.
Must be performed using
the TrueCopy for
Mainframe software.
MCU/RCU——Group Status
Must be performed using
the TrueCopy for
Mainframe software.
MCU——Delete Group
Establishes a TrueCopy for
Mainframe pair and sets
M-VOLPPRCOPY ESTPAIRCESTPAIR
(MODE=COPY)
Add Pair
the initial copy and pair
options (copy mode =
synchronous or
asynchronous only, priority
= 0, CFW data = copy to
R-VOL, DFW to R-VOL = not
Overview of PPRC Commands 189