HP Hitachi ShadowImage for Mainframe User Guide (T5213-96032, November 2011)

The Detail box in the Detail dialog box has the following features:
• The S-VOL Information displays the following information:
Volume ID: The information for the S-VOL display in XX:YY:ZZ (LDKC number: CU number:
LDEV number) format.
An LDEV number that ends with a pound or gate symbol (#) indicates that the LDEV is
an external volume (for example, 00:00:01#). For details regarding the external volumes,
see the HP XP24000/XP20000 External Storage Software User's Guide.
◦
◦ CLPR: The cache logical partition of the S-VOL displays.
• The Volume Information displays the following information:
Emulation : The emulation type of the volume displays.◦
◦ Capacity(Cyl): The volume capacity in cylinders is displays.
• The Pair Information box displays the following information:
S-VOL: The S-VOL information displays in XX:YY:ZZ (LDKC number: CU number: LDEV
number) format.
◦
◦ T-VOL: The T-VOL information displays in XX:YY:ZZ (LDKC number: CU number: LDEV
number) format.
◦ Status: The status of the pair displays. For detailed information about the pair status, see
(page 21).
◦ Sync.: The rate of synchronization of the S-VOL and the T-VOL.
◦ CTG: The CTG ID displays when the pair is registered to the CTG. If the pair is not
registered in the CTG, dashes--- are displayed.
◦ CLPR(S): The information for the CLPR where the S-VOL belongs displays in AA:BBB (CLPR
number: CLPR name) format.
◦ CLPR(T): The information for the CLPR where the T-VOL belongs displays in AA:BBB (CLPR
number: CLPR name) format.
• Refresh the window after this dialog box is closed. check box: If you select the check box, the
information displayed in the Pair Operation window will be updated after the Detail dialog
box closes. If you do not select the check box, the information in the Pair Operation window
will be the same before and after you close the Detail dialog box.
• The Refresh button updates the setting to the latest information displayed on the Detail dialog
box.
• The Close button closes the Detail dialog box.
Viewing the Number of Pairs and License Information
The Information dialog box displays information such as the number of pairs in the storage system,
the number of reserved volumes, and the license capacity.
To display the Information dialog box:
1. Right-click anywhere on the volume list of the Pair Operation window.
A menu will be displayed.
2. Click the Information command in the menu.
The Information dialog box appears.
84 Performing ShadowImage for Mainframe Operations Using Remote Web Console