Hitachi TrueCopy (TM) for Mainframe User Guide: HP XP24000 Disk Array, HP XP20000 Disk Array (T5211-96014, May 2011)

The Add RCU dialog box (see “Add RCU Dialog Box” (page 106)) allows you to add an RCU to
the selected CU of the connected MCU. To open the Add RCU dialog box, select the MCU&RCU
display on the RCU Operation window, select the desired CU in the tree, right-click the list, click
the RCU Operation command, click Add RCU command, and then click the Add RCU (Fibre)
command.
Figure 35 Add RCU Dialog Box
RCU S/N: allows you to enter the five-digit serial number of the RCU being added.
LDKC: allows you to enter the LDKC number which the RCU belongs to. Specify 00 or 01. You can
specify only 00 for the current microcode version.
Controller ID: allows you to select the controller ID (storage system family ID) of the RCU being
added from the drop-down list. The controller ID for an XP24000/XP20000 Disk Array is 5, the
controller ID for an XP12000/XP10000 Disk Array is 4, and the controller ID for an XP1024/XP128
Disk Array is 3.
106 Performing TrueCopy for Mainframe Configuration Operations