Hitachi TrueCopy for z/OS User Guide (T1711-96024, November 2011)
216 Hitachi TrueCopy z/OS for HP XP12000/XP10000 and SVS 200 storage systems
NOTE: ErrorCode-6005 xxxx corresponds to the XP Command View Advanced Edition Software or XP
Remote Web Console error codes.
HXRC device blocking and load balancing
The XP12000/XP10000 supports the IBM-compatible specifications for XRC device blocking and load
balancing control. In addition, the XP12000/XP10000 provides more flexible tuning methods for load
balancing control under HXRC environments as shown below.
Device blocking function
The XP12000/XP10000 HXRC function supports the new TSO command specifications for the XRC device
blocking function.
• DONOTBLOCK option. DONOTBLOCK is a new option parameter that is specified by the XADDPAIR
command.
• DONOTBLOCK: The amount of write data for application programs are blocked by the threshold
specified by SDM. Default value is “500”HEX RECSETs.
• Specified: When the DONOTBLOCK option is specified to a logical device, the amount of write
data of application programs for the logical device is not blocked.
• XQUERY. The number of RECSET and the current threshold value corresponding to a logical device will
be displayed by the XQUERY command.
CAUTION: If you specify the DONOTBLOCK option for too many devices, a sidefile puncture condition
will occur. Use caution when determining the appropriate tuning (devices with DONOTBLOCK option, SVP
modes) for your operational environment.
- 5004 API error(SetCreatePair).
ErrorCode=6005 xxxx
An error occurred during the create pair operation.
- 5005 API error(SuspendPair).
ErrorCode=6005 xxxx
An error occurred during the suspending pair
operation.
- 5006 API error(ChangePairOption).
ErrorCode=6005 xxxx
An error occurred during the changing pair
operation.
-5007API error(DeletePair).
ErrorCode=6005 xxxx
An error occurred during the deleting pair
operation.
- 5008 API error(StartCreatePair).
ErrorCode=6005 xxxx
An error occurred during the copy start instruction.
- 5020 API retry(GetPairStatus256). An error occurred at retrying the getting pair status
operation.
- 4006 Too many pairs (SetList/AddList). The number of pairs that is specified in the device
list exceeds the maximum value.
- 6666 Abort by operator. The operation is interrupted by a user.
- 6667 Abort by unlock. The operation is interrupted according to the modify
mode timeout.
Table 67 TrueCopy scripting error codes (continued)
Message
ID
Internal
Code
Error Message Error Description