Hitachi TrueCopy for z/OS user guide (December 2005)

94 TrueCopy for the XP128/XP1024/XP10000/XP12000
NOTE: The options can be modified and/or canceled after you have set them. See ”Modifying
Parameters and Omitting Selected Settings” on page 95.
Figure 54 Opening the Add SSID window
4. To delete the SSID(s): Right-click to display the pop-up menu, click Edit SSID(s) & Path(s), and then click
Delete SSID. The list changes to the SSID Settings Parameter list. Only the RCUs that are to be deleted
are listed.
NOTE: The options can be modified and/or canceled after you have set them. See ”Modifying
Parameters and Omitting Selected Settings” on page 95.
5. Click Apply on the TrueCopy main window.
Modifying Parameters and Omitting Selected Settings
After the RCU, Path, and/or SSID operation, the parameters can be modified individually. Also the RCUs,
Paths, and/or SSIDs that you have set by the each operation can be omitted from the pair operation.
To modify the parameters:
1. Select a RCU, Path, or SSID whose parameters you want to modify on the list.
2. Right-click to display the pop-up menu and click Modify to modify the parameters. A window for each
operation is displayed.
3. Modify the parameters and click Set in the window.
4. Click Apply on the TrueCopy main window.
NOTE: After the delete operation of the RCU, Path, and/or SSID operation, the Modify command
is not available.
To omit the RCUs, Paths, or SSIDs from the operation:
1. Select the RCUs, Paths, or SSIDs to be omitted from the operation on the list.