Hitachi TrueCopy for z/OS user guide (December 2005)

TrueCopy for z/OS user guide 93
NOTE: The options can be modified and/or canceled after you have set them. See ”Modifying
Parameters and Omitting Selected Settings” on page 95.
5. Click Apply on the TrueCopy main window.
Adding and Deleting SSIDs for an RCU (Add SSID and Delete SSID)
Before adding an SSID, verify that the remote copy connection is properly installed. You can add three
SSIDs to each RCU. Before deleting an SSID, verify the remaining SSIDs are still valid, or the connection
between the MCU and RCU may be lost.
When the Add SSID command is selected, the Add SSID window is displayed. Use the Add SSID window
to add three SSIDs at once to the selected RCU CU image.
Figure 53 Add SSID window
The Add SSID window displays three SSID boxes to enter. You can enter up to three SSIDs at once with the
Add SSID window. You can add up to four SSIDs (the maximum number of the SSID) in total.
The Cancel button cancels the settings you made. The Set button applies the settings you made and
changes the list.
To add or delete an SSID for an existing RCU:
1. From the CU Number tree on the RCU Operations window, verify the correct CU image is selected.
2. From the MCU/RCU list on the RCU Operations window, select the RCU that you want to add or delete
the SSID(s).
3. To add an SSID:
a. Right-click to display the pop-up menu, click Edit SSID(s) & Path(s), and then click Add SSID. The Add
SSID window is displayed.
b. From the Add SSID window, enter the new SSID(s) in the SSID boxes. You can add up to four SSIDs
(in total) to the RCU.
c. Click Set to add the SSIDs. The list changes to the SSID Settings Parameter list. The added SSIDs are
listed.