Hitachi TrueCopy for z/OS user guide (December 2005)

TrueCopy for z/OS user guide 175
TrueCopy Scripting
Overview of Scripting
An added benefit of the TC390 feature is its support for scripting operations. This capability provides the
user with additional flexibility in managing their TC390 environment. A TC390 script file contains a list of
macros (commands) that describes a series of TC390 pair operations. The TC390 scripting macros are
defined in a text file, and Command View XP or XP Remote Web Console reads the text file and executes
the specified TC390 pair operations.
D7 sx Service The R-VOL has accepted/completed state
change as requested by operation. The third
digit of the reference code “s” indicates the
events as follows:
0: Accepted Suspend Pair operation.
1: Accepted Delete Pair operation. R-VOL is
suspended.
2: Accepted Delete Pair operation. R-VOL is
duplex.
3: Accepted Delete Pair operation. R-VOL is
pending.
4: Completed Suspend Pair operation.
5: Completed Delete Pair operation.
No RCU SSB Log
DB 0x Serious The volume pair was suspended due to a
failure on the remote copy connections.
Yes
2
Repeat
MCU SIM log
DB 1x Serious The volume pair was suspended due to a
failure on the M-VOL or remote copy.
Yes
2
Repeat
MCU SIM log
DB 2x Serious The volume pair was suspended due to a
failure on the R-VOL.
Yes
2
Repeat
MCU SIM log
DB 3x Serious The volume pair was suspended because
DFW to the R-VOL was blocked.
Yes
2
Repeat
MCU SIM log
DB 4x Serious The M-VOL has changed to suspended state
due to an internal error condition detected
by the RCU.
Yes
2
Repeat
MCU SIM log
DB 5x Serious The M-VOL has changed to suspended state
because the operator deleted the volume
pair from the RCU.
Yes
2
Repeat
MCU SIM log
DB 6x Serious The RCU has suspended all R-VOLs in the
consistency group due to time out failure
defined by the maximum copy delay time.
Yes
2
Repeat
RCU SIM log
DB 7x Serious The RCU has suspended all R-VOLs in the
consistency group due to the internal logic
error.
Yes
2
Repeat
RCU SIM log
DB 8x Service The R-VOL was suspended due to MCU
power-off event.
Yes
1
Once
RCU SSB Log
DB Fx Serious The status of the M-VOL is not consistent with
the status of the R-VOL.
Yes
2
Repeat
MCU SIM log
1. These SIMs are reported to the host only if the Service SIM=Report and PPRC Support=No RCU options are both selected.
2. These SIMs are reported to the host system only if the PPRC Support=No RCU option is selected.
Table 43 TrueCopy device SIMs (continued)
Ref. Code Severity Description Reported
to Host
Generated by Log File
22 23