Hitachi TrueCopy for IBM z/OS User and Reference Guide (T5211-96001, June 2007)

5-32 Performing TrueCopy for z/OS Configuration Operations
Hitachi Universal Storage Platform V TrueCopy for IBM z/OS User’s Guide
To set the async options:
1. Click the Asynchronous Operation tab. You do not need to select anything
in the tree.
2. Right-click the CT group list (you do not need to select anything), and click
Async Option to open the Async Option dialog box (refer to Figure 5-7). The
async options can only be modified when no TrueCopy for z/OS Async pairs
or groups exist in the connected CU (M-VOLs or R-VOLs).
3. On the Async Option dialog box, select the desired parameters. For further
information on the asynchronous copy options.
4. Click Set to close the Async Option dialog box. (Click Cancel to cancel the
async option operation.) The preview list displays the requested async option
operation.
5. Verify the requested operation displayed in the preview list.
To change the async option operation, select the operation from the
preview list, right-click, and click Modify. To remove the operation, select
it from the preview list, right-click, and click Delete. To cancel all
operations, select all the operations in the preview list, right-click, and click
the Delete command, or click the Cancel button.
6. To apply the settings, click Apply.