Hitachi TrueCopy for IBM z/OS User and Reference Guide (T5211-96001, June 2007)

5-20 Performing TrueCopy for z/OS Configuration Operations
Hitachi Universal Storage Platform V TrueCopy for IBM z/OS User’s Guide
The Delete Path command allows you to delete a path to an existing RCU.
To delete one or more paths from the connected MCU to an existing RCU:
1. Open the RCU Option dialog box, and check the Minimum Paths setting. If
the remaining number of paths will be less than this value, the delete path
operation will fail. If needed, change the Minimum Paths RCU option so that
you can delete the desired path.
2. Click the RCU Operation tab, and click the MCU&RCU display button.
3. Select and double-click the desired MCU CU in the tree, and select the RCU
for which you want to delete path(s). Alternatively, select the RCU in the list,
right-click and click Edit SSID(s) & Path(s). All paths to the selected RCU
are listed.
4. Right-click the path(s) that you want to delete, and click Delete Path. When
the confirmation message appears, click OK to delete the path(s), or click
Cancel to cancel your request to delete it/them. The preview list displays the
path(s) that you want to delete. "Delete" is displayed on the rightmost
column of the selected path in the SSID/Path list.
5. Verify the requested operation(s) displayed in the preview list and the
SSID/Path list.
To remove an operation, select the operation, right-click, and click Delete.
To cancel all operations, select all the operations in the preview list, right-
click, and click the Delete command, or click the Cancel button.
6. To start the operation(s), click Apply.