Hitachi ShadowImage for z/OS user guide (HIT9503-96009, January 2008)

Code
Message
Description
0028
RELEASING OF THE EXPANSION
SETTING ENDED NORMAL
The release process of relationship
expansion ended normally.
0029 INITIALIZE ENDED NORMAL(FC)
The FlashCopy M
irror V2
initializati
on process ended.
002A COPY ENDED ABNORMAL(FC)
The FlashCopy Mirror V2 copy
operation ended abnormally.
002D
EXPANSION SETTING ENDED
ABNORMAL
The setting process of relationship
expansion ended abnormally.
002E
RELEASING OF
THE EXPANSION
SETTING ENDE
DABNORMAL
The release process of relationship
expansion ended abnormally.
002F
INITIALIZE ENDED
ABNORMAL(FC)
The FlashCopy Mirror V2
initialization process ended
abnormally.
0030
COPY STARTED AFTER MODE
CHANGED(FC)
The FlashCopy Mirror V2
copy operation started after
the FlashCopy Mirror V2 pair
changed to COPY mode. Please
note that this message occurs
whenthemodechangestoCOPY,
not when the copy operation
starts.
003A
DELETED BY SM
VOLATILIZING(FC)
The Flas
hCopy Mirror V2
relatio
nship was withdrawn due
to vola
tilization of the shared
memory
.
003B
SUSPENDED(FC)
The FlashCopy Mirror V2
relationship n was suspended due
toerrororfailure.
Setting Hitachi ShadowImage™ for z/OS Options
You can set options for Siz on the Siz Options window (see Figure 41 on page 94). Click the Options tab
on the Siz main window to open the Siz Options window. On the Siz Options window, click and/or
clea
r the check boxes to set options.
Hitachi ShadowImage for z/OS user guide
93