Hitachi ShadowImage for z/OS user guide (HIT9503-96009, January 2008)

Figure 39 Delete Volume Pair Dialog Box

The Delete Volume Pair dialog box consists of the following components:

• Delete Volume Pair Volume List The Volume List located on the upper side of the Delete Volume

Pair dialog box displays the following information pertaining to the S-VOL and T-VOL of the pair

you want to delete: – Source Vol: The CU:LDEV of the S-VOL.

NOTE:

An LDEV number that ends with a “#” mark indicates that the LDEV is a external volume (e.g.

00:01#).

• Status: The pair status (Simplex, Pending, Duplex, Split, Resync, Suspend, SP-Pend, Resync-R,

V-Split, F-Copy).

• Target Vol: The CU:LDEV of the T-VOL.

NOTE:

An LDEV number that ends with a “#” mark indicates that the LDEV is a external volume (e.g.

00:01#).

• Type: The emulation type of the S-VOL and T-VOL.

• Capacity(CYL): The number of cylinders assigned to the volume.

• CLPR(S): The cache logical partition of the S-VOL.

• CLPR(T): The cache logical partition of the T-VOL.

• The OK button adds the operation setting(s) to delete the selected pair(s) displayed in the Delete

VolumePairVolumeListtothePresetListontheSizmainwindow.

NOTE:

You must click the Apply button on the Siz main window to apply the Delete Volume Pair operation

setting(s) displayed in the Preset List to the storage system.

• The Cancel button cancels the operations set in the Delete Volume Pair dialog box and closes

the Delete Volume Pair dialog box.

NOTE:

ToremoveanypairsfromtheDeleteVolumePairVolumeList,selectthedesiredpairsdisplayedin

thePresetListontheSizmainwindow,right-clickthemousetoselecttheDeletecommandfromthe

pop-up menu that appears after right-clicking.

Performing Hitachi ShadowImage for z/OS Operations