Hitachi ShadowImage for z/OS user guide (HIT9503-96009, January 2008)

Figure 38 Suspend Volume Pair Dialog Box

The Suspend Volume Pair dialog box consists of the following components:

• Suspend Volume Pair Volume List

TheVolumeListlocatedontheuppersideoftheSuspendVolumePairdialogboxdisplaysthe

following information pertaining to the S-VOL and T-VOL of the pair you want to suspend:

• Source Vol: The CU:LDEV of the S-VOL.

NOTE:

An LDEV number that ends with a “#” mark indicates that the LDEV is a external volume (e.g.

00:01#)

• Status: The pair status (Simplex, Pending, Duplex, Split, Resync, Suspend, SP-Pend, Resync-R,

V-Split, F-Copy).

• Target Vol: The CU:LDEV of the T-VOL.

NOTE:

An LDEV number that ends with a “#” mark indicates that the LDEV is a external volume (e.g.

00:01#).

• Type: The emulation type of the S-VOL and T-VOL.

•Capacit

y(CYL): The number of cylinders assigned to the volume.

• CLPR(S): The cache logical partition of the S-VOL.

• CLPR(T): The cache logical partition of the T-VOL.

• The OK bu

tton adds the operation setting(s) to suspend the selected pair(s) displayed in the

Suspend Volume Pair Volume List to the Preset List on the Siz main window.

NOTE:

You must click the Apply button on the Siz main window to apply the Suspend Volume Pair operation

setting(s) displayed in the Preset List to the HP StorageWorks XP12000 storage system.

• The Cancel button cancels the operations set in the Suspend Volume Pair dialog box and closes

the Suspend Volume Pair dialog box.

Performing Hitachi ShadowImage for z/OS Operations