Hitachi ShadowImage for z/OS user guide (HIT9503-96009, January 2008)

Figure 36 Split Volume Pair Dialog Box

The Split Volume Pair dialog box consists of the following components:

• SplitVolumePairVolumeList

The Volume List located on the upper side of the Split Volume Pair dialog box displays the

following information pertaining to the S-VOL and T-VOL of the pair that you want to split:

• Source Vol: TheCU:LDEVoftheS-VOL.

NOTE:

An LDEV number that ends with a “#” mark indicates that the LDEV is a external volume (e.g.

00:01#).

• Status: The pair status (Simplex, Pending, Duplex, Split, Resync, Suspend, SP-Pend,

Resync-R, V-Split, F-Copy).

• Target Vol: The CU:LDEV of the T-VOL.

NOTE:

An LDEV number that ends with a “#” mark indicates that the LDEV is a external volume

(e.g. 00:01#).

• Type: The emulation type of the S-VOL and T-VOL.

• Capaci

ty (CYL): The number of cylinders assigned to the volume.

• CLPR(S): The cache logical partition of the S-VOL.

• CLPR(T): The cache logical partition of the T-VOL.

• The Co

py Pace drop-down list allows you to choose the copy pace (from Slower, Medium, or

Faster) for all the pairs that you are splitting.

Hitachi ShadowImage for z/OS user guide