Hitachi ShadowImage for z/OS user guide (HIT9503-96009, January 2008)

NOTE:
You can check whether the attribute setting is updated or not on the Display Filter dialog box. To open
the Display Filter dialog box, click the Display Filter button.
Adding Hitachi ShadowImage™ for z/OS Pairs
WARNING!
The Siz add pair operation overwrites all data on the T-VOLs. The user is responsible for backing up
the data on the T-VOLs before adding Siz pairs.
The Add Pair Dialog box (see Figure 35 on page 75) displays the S-VOL and T-VOL information for the
pair(s) being added and allows you to select the T-VOL(s) for each S-VOL, set the copy pace for all pairs
being added, and start the Add Pair operation(s). To open the Add Pair Dialog box, select one or
morepairorvolumesintheVolumeListontheSizmainwindow,right-clickthemousetodisplaythe
pop-up menu, and then click the Add Pair command.
NOTE:
Siz supports the CESTPAIR/PPRCOPY ESTPAIR commands for adding (starting) Siz pairs. See
Chapter 5 on page 99 for further information on using PPRC commands.
Figure 35 Add Pair Dialog Box
The Add Pair Dialog B consists of the following components.
• Add Pair Volume List
TheVolumeListlocatedontheuppersideoftheAddPairDialogboxdisplaysthefollowing
information pertaining to the P-VOL and S-VOL used for adding a pair:
• Source Vol: TheCU:LDEVoftheS-VOL.
Hitachi ShadowImage for z/OS user guide
75