Hitachi ShadowImage for z/OS user guide (HIT9503-96009, January 2008)

NOTE:
The settings in the Display Filter dialog box are only effective within the current Siz operations. If you
switch to another option program (e.g., TCz), or click a button on the toolbar on the Remote Web
Consolemainwindow,thesettingsintheDisplayFilterarereset.
Preset List
ThePresetListbox(seeFigure 31 on page 69) is located below the Volume List, and lists the specified
zSeries and IBM System z operations (volume/pair information), which have not been applied to in
the HP StorageWorks XP12000 storage system.
NOTE:
The Preset List allows you to hold multiple settings of the same operation (e.g., Add Pair) only. You cannot
display different types of operations (e.g., Split Pair and Resync Pair) in the Preset List box at the same
time. You can also cancel the operations in the Preset List at any time before they are applied to the HP
StorageWorks XP12000 storage system by clicking the Apply button.
Figure 31 Preset List
ThePresetListboxdisplaysthefollowinginformationofspecified operations:
• Source Vol: The CU:LDEV (control unit image:logical device ID) of the S-VOL.
NOTE:
An LDEV number that ends with a “#” mark indicates that the LDEV is an external volume (e.g.
00:01#). For more information, see the
HP StorageWorks External Storage XP user guide for the
XP12000, XP10000, SVS200
.
• Target Vol: The CU:LDEV (control unit image:logical device ID) of the T-VOL.
NOTE:
An LDEV number that ends with a “#” mark indicates that the LDEV is an external volume (e.g.
00:01#). For more information, see the
HP StorageWorks External Storage XP user guide for the
XP12000, XP10000, SVS200
.
• Copy Pac
e: The copying pace for all pairs being added: Slower, Medium, and Faster.
• CLPR (S): The cache logical partition (CLPR) of the S-VOL.
• CLPR (T): The cache logical partition (CLPR) of the T-VOL.
• Code: T
he reason code is displayed if the preset operations (settings) cannot be applied
succes
sfully with the Apply button.
To perform the specified operations, you must click the Apply button on the Siz main window. When all
the operations are performed successfully, the Preset List box is cleared. If some operations cannot be
Hitachi ShadowImage for z/OS user guide
69