Hitachi ShadowImage for z/OS user guide (HIT9503-96009, January 2008)

Figure 30 Display Filter Dialog Box

The Display Filter dialog box has the following features:

• The CLPR drop-down list allows you to display the speciﬁed cache logical partition (CLPR).

• TheVolumeTypebox:

• The Internal Vol check box allows you to display the internal volumes.

• The External Vol check box allows you to display the external volumes.

NOTE:

Both check boxes are selected by default.

• The Attribute box: The Pair check box allows you to display paired volumes.

• The Reserved check box allows you to display reserved or unreserved volumes. If you click the

Reserve check box, reserved volumes and volumes speciﬁed as the T-VOLs are displayed in

the Volume List. If you clear the Reserve check box, only unreserved volumes are displayed.

NOTE:

If you click the Reserved check box, you cannot click any other check boxes.

NOTE:

Volumes

speciﬁedastheT-VOLofaSizpairareautomaticallyreservedbythestoragesystem.

• The Non-Pair check box allows you to display non-paired (simplex) volumes.

• The Pair Status box allows you to ﬁlter the pairs displayed in the Volume List box by pair status:

Pending,Duplex,Split,Resync,Suspend,Resync-R,V-Split,SPPend,Deleting,andF-Copy.

NOTE:

All check boxes are selected by default.

• The OK button applies the settings, and closes the Display Filter dialog box.

• The Cancel button resets the settings, and closes the Display Filter dialog box.

Performing Hitachi ShadowImage for z/OS Operations