Hitachi ShadowImage for z/OS user guide (HIT9503-96009, January 2008)

ManualsBrandsHP ManualsSoftwareHP Remote Web Console XP

Z = maximum number of reserved volumes that can be created in one storage system.

You can perform Siz operations for the desired volume(s) in the Volume List, by using the following

pop-up menu commands that you can display by right-clicking the mouse while selecting the desired

volumeintheVolumeList.

Table 15 List of Siz Popup Menu Commands

Command

Feature

Detail

Opens the Detail dialog box that displays information

for the selected volume or pair (see Figure

29 on page 67).

Add Pair

Opens the Add Pair Dialog box, which allows

you to create (add) new Siz pairs (see Figure

35 on page 75).

Split PairDF

Opens the Split Volume Pair dialog box, which allows

you to split Siz pairs.

Resync Pair

Opens the Resync Volume Pair dialog box, which

allows you to re-synchronize Siz pairs (see Figure

37 on page 83).

Suspend Pair

Opens the Suspend Volume Pair dialog box,

which allows you to suspend Siz pairs (see Figure

38 on page 86).

Delete Pair

Opens the Delete Volume Pair dialog box,

which allows you to delete Siz pairs (see Figure

39 on page 88).

Change Reserve

Opens the Set Reserve Attribute dialog box or

Reset Reserve Attribute dialog box and allows you

to set/reset the Siz reserve attribute (see Figure

33 on page 73 and Figure 34 on page 74).

Display Filter

Opens the Display Filter dialog box, which allows

you to ﬁlter the volumes displayed in the Volume List.

FlashCopy Info

Opens the FlashCopy Information dialog box that

displays information about the resources used by

FlashCopy Mirror V2.

Disable -> Enable The relationship expansion function

ofFlashCopyMirrorV2isenabled. Ifyouselect

this command, the setting is applied to the storage

system. The program product of FlashCopy Mirror V2

is required to use this function.

Relationship Expansion

Enable -> Disable The relationship expansion function

of FlashCopy Mirror V2 is disabled. If you click this

command, the setting is applied to the storage system.

Detail Dialog Box

The Detail dialog box displays information for a selected volume or pair (see Figure 29 on page 67). To

open the Detail dialog box, select a pair or volume in the Volume List on the Siz main window, right-click

the mouse to display the pop-up menu, and then click the Detail command. If the S-VOL of the selected

pairhastwoorthreeT-VOLsthatsharethesameS-VOL,allT-VOLsaredisplayedontheDetaildialogbox.

NOTE:

Siz supports the CQUERY/PPRCOPY QUERY commands for viewing Siz pair status. See

Chapter 5 on page 99 for further information on using PPRC commands.

Performing Hitachi ShadowImage for z/OS Operations