Hitachi ShadowImage for z/OS user guide (HIT9503-96007, October 2007)

ShadowImage for z/OS user guide 49
The Volume List Box
The Volume List box displays volume/pair information based on the filter options you select in the Tree
View box. You can also filter the volumes by reserve attribute, by pair condition, and pair status by clicking
Display Filter.
Figure 21 Volume List box
The Volume List box lists all installed volumes (LDEVs) on the selected CU image and displays the following
information for each volume:
• Source Vol: The CU:LDEV (control unit image:logical device ID) of the source volume (S-VOL).
• Status: The SI390 pair status of the volume pair: Simplex, Pending, Duplex, Split, Resync, Suspend,
SP-Pend, Resync-R, or V-Split.
• Target Vol: The CU:LDEV (control unit image:logical device ID) of the T-VOL. If there is no T-VOL, --- is
displayed.
• Copy Pace: The specified copy pace (Slower, Medium, or Faster) is displayed.
• Progress: The information according to the pair status is displayed as shown in the following table.
• Type: The device emulation type (for example, 3390-9, 3390-3R, or 3390-3A/B/C). For details, see
Table 3 on page 18.
• CYL: The number of cylinders assigned to the volume.
• CTG: The registered ID of the consistency group.
• CLPR (S): The S-VOL’s cache logical partition.
• CLPR (T): The T-VOL’s cache logical partition.
Table 13 Displayed information in progress
Pair Status Displayed Information
Simplex - - - is displayed.
Pending The progress (%) of copying.
Duplex Identical data (%) of S-VOL and T-VOL.
SP-Pend Copy completed data (%).
V-Split Copy completed data (%).
Split Identical data (%) of S-VOL and T-VOL.
Resync Identical data (%) of S-VOL and T-VOL.
Resync-R Identical data (%) of S-VOL and T-VOL.
Suspend - - - is displayed.
F-Copy Copy completed data (%).