Hitachi ShadowImage for z/OS user guide (December 2005)

ShadowImage for z/OS user guide 45
• CLPR (S): The S-VOL’s cache logical partition.
• CLPR (T): The T-VOL’s cache logical partition.
• Relationship(s): The current state of the volume in terms of whether the FlashCopy Mirror Version 2
relationship is established or not. When no relationship is established, --- is displayed. When a
relationship is established, the status of the volume is displayed as shown in Table 14. The parameter
displayed in Relationship(s) changes according to whether the volume is an S-VOL or T-VOL, or the
settings are normal or not.
You can perform SI390 operations for the volume(s) in the Volume List box by using the following pop-up
menu commands, which you can display by right-clicking with the mouse:
The Detail Window
The Detail window displays information for the selected volume or pair. To open the Detail window, select
a pair or volume in the Volume List box on the ShadowImage main window, right-click to display the
pop-up menu, and then click Detail. If the S-VOL of the selected pair has two or three T-VOLs that share the
same S-VOL, the Detail window displays all the T-VOLs.
Table 14 Parameters displayed in Relationship(s)
Volume Parameter
S-Failed Settings are Abnormal
S-VOL S-Normal S-Failed
T-VOL T-Normal T-Failed
Volume set for both S-VOL and T-VOL ST-Normal ST-Failed
Table 15 List of ShadowImage pop-up menu commands
Command Feature
Detail Opens the Detail window, which displays information for the selected volume or pair.
Add Pair Opens the Add Pair Dialog window, which creates (adds) new SI390 pairs.
Split Pair Opens the Split Volume Pair window, which splits SI390 pairs.
Resync Pair Opens the Resync Volume Pair window, which resynchronizes SI390 pairs.
Suspend Pair Opens the Suspend Volume Pair window, which suspends SI390 pairs.
Delete Pair Opens the Delete Volume Pair window, which deletes SI390 pairs.
Change Reserve Opens the Set Reserve Attribute or Reset Reserve Attribute window, which sets/resets the SI390
reserve attribute.
Display Filter Opens the Display Filter window, which filters the volumes displayed in the Volume List box.
FlashCopy Info
Opens the FlashCopy Information panel that displays the information of the resources
used by FlashCopy Mirror Version 2.