Hitachi ShadowImage for Mainframe User Guide: HP XP24000 Disk Array, HP XP20000 Disk Array (T5213-96032, May 2011)

Figure 35 Resynchronize Volume Pair Dialog Box
The Resynchronize Volume Pair dialog box consists of the following components.
• Resynchronize Volume Pair Volume List
The Volume List located on the upper side of the Resynchronize Volume Pair dialog box displays
the following information pertaining to the S-VOL and T-VOL of the pair you want to
resynchronize:
◦ S-VOL: The LDKC:CU:LDEV of the S-VOL.
An LDEV number that ends with a pound or gate symbol (#) indicates that the LDEV is an
external volume (for example, 00:00:01#). For details regarding the external volumes,
see the HP StorageWorks XP24000/XP20000 External Storage Software User's Guide.
◦ Status: The pair status displays.
◦ T-VOL: The LDKC:CU:LDEV of the T-VOL.
An LDEV number that ends with a pound or gate symbol (#) indicates that the LDEV is an
external volume (for example, 00:00:01#). For details regarding the external volumes,
see the HP StorageWorks XP24000/XP20000 External Storage Software User's Guide.
◦ Emulation: The emulation type of the S-VOL and T-VOL.
◦ Capacity(Cyl): The number of cylinders assigned to the volume.
◦ CLPR(S): The cache logical partition of the S-VOL.
◦ CLPR(T): The cache logical partition of the T-VOL.
• The Resync Type list allows you to select the resync type for the pairs being resynchronized
(from Normal Copy(S->T), Quick Resync(S->T), Reverse Copy(T->S), or Quick Restore(T->S)).
Before selecting Reverse Copy(T->S) or Quick Restore(T->S), make sure that the selected pair
meets the requirements listed in Table 32 (page 83).
82 Performing ShadowImage for Mainframe Operations Using Remote Web Console