Hitachi ShadowImage for Mainframe User Guide: HP XP24000 Disk Array, HP XP20000 Disk Array (T5213-96032, May 2011)

Displaying Pair Status Using PPRC Commands
The CQUERY TSO and PPRCOPY QUERY ICKDSF commands are equivalent to the SIz pair status
display and status and history functions.
ShadowImage for Mainframe supports multiple T-VOLs for an S-VOL, and SIz and TCz can both
be defined for the same volume. When multiple pairs exist on one volume, the CQUERY and the
PPRCOPY QUERY commands can only report the status of one pair. Table 45 (page 105) lists the
status displayed by the host for the SIz and/or TCz volume pair configurations.
• If the HP disk array contains only ShadowImage for Mainframe pairs, the CQUERY and the
PPRCOPY QUERY commands will report the ShadowImage for Mainframe pair status.
• If the HP disk array contains only TrueCopy for Mainframe pairs, the CQUERY and the
PPRCOPY QUERY commands will report the TCz pair status.
• If the HP disk array contains both ShadowImage for Mainframe and TrueCopy for Mainframe
pairs, the CQUERY and the PPRCOPY QUERY commands will report the TCz pair status.
To obtain the SIz pair status, issue the status command to the SIz T-VOL or use the ShadowImage
for Mainframe remote console software to view the SIz pair status.
• If an S-VOL has multiple T-VOLs, the status command will report pair status for the pair whose
T-VOL has the lowest LDEV ID. To obtain the status of a ShadowImage for Mainframe pair
with one of the other T-VOLs, issue the status command to the desired T-VOL. See
Table 45 (page 105) and Table 46 (page 105).
Table 45 Pair Status Reported by the Host for Volumes in Multiple Pairs
Status Displayed by HostNumber of TCz PairsNumber of SIz Pairs
SIMPLEX00
SIz pair status01
SIz pair whose T-VOL has the lowest LDEV ID02 or more
TCz pair status10
TCz pair status11
TCz pair status12 or more
Table 46 Path Status Displayed by the CQUERY TSO and PPRCOPY QUERY DSF Commands
PPRCOPY QUERY DSF CommandCQUERY TSO CommandTCzSIz
No TCz path
exists.
TCz path exists.No TCz path
exists.
TCz path exists.
−Displays TCz path−Displays TCz pathS-VOLS-VOL
---- ----−---- ----−T-VOL
FFFF FFFF−FFFF FFFF−No volume
−Displays TCz path−Displays TCz pathS-VOLT-VOL
−−−−T-VOL
FFFF FFFF−---- ----−No volume
NOTE: The dash symbol (−) indicates that the combination is impossible.
Table 47 (page 106) shows the items and contents that will be displayed when you execute the
CQUERY command or the QUERY command on an SIz pair.
Displaying Pair Status Using PPRC Commands 105