Hitachi ShadowImage for IBM z/OS User"s Guide (T5213-96002, June 2007)

Using ShadowImage™ for z/OS
®
GUI 4-7
Hitachi ShadowImage™ for IBM
®
z/OS
®
User’s Guide
Note: An LDEV number that ends with a “#” mark indicates that the LDEV
is an external volume (e.g. 00:00:01#). For details regarding the external
volumes, see the Universal Volume Manager User’s Guide.
• Copy Pace: The copying pace for all pairs being added.
• CLPR (S): The cache logical partition (CLPR) of the S-VOL.
• CLPR (T): The cache logical partition (CLPR) of the T-VOL.
• Error Code: The reason code is displayed if the preview operations
(settings) cannot be applied successfully with the Apply button.
The information displayed in the information field below the Preview List is as
follows:
• Preview: X(Y)/Z, where
X = the number of settings remaining in the Preview List that are still not
applied to the USP V system
Y = the type of pair operation
Z = command option
You can change the Preview List by right-click the setting in the Preview
List and display the pop-up menus. Table 4-3 shows the available pop-up
menu commands in the Preview List.
Table 4-3 ShadowImage for z/OS Pop-up Menu Commands of the
Preview List
Command Feature
Delete
Cancels the selected setting(s). If you perform this command, the selected setting(s) will be
cleared.
Modify
Allows you to change the setting of the selected operation. This command becomes accessible
only when the item you select from the Preview List is set to Add Pair, Split Pair or Resync
Pair operation.
Error Detail
Displays the error message dialog box, which displays the error code and message. For the SIz
error codes, see the Storage Navigator Messages.