Hitachi ShadowImage for IBM z/OS User"s Guide (T5213-96002, June 2007)

7-20 Performing ShadowImage for z/OS Pair Operations Using PPRC
Hitachi ShadowImage™ for IBM
®
z/OS
®
User’s Guide
Item Content
LIC LEVEL Since this item is invalid for SIz pairs, the content of this item is also invalid.
Note*: When the MCU-RCU path for TCz is created on the CU where the SIz
pair is created, the information about the MCU-RCU path will be displayed. For
detailed information about the MCU-RCU path, see the TrueCopy for IBM z/OS
User’s Guide.
CQUERY
Table 7-15 lists and describes the CQUERY command parameters that can be
used when you refer to the status of SIz pairs.
Table 7-15 CQUERY Command Parameters
Parameter Value
DEVN Device number.
Figure 7-10 shows an example of the CQUERY command.
14.27.58 JOB04573 ANTP8802I CQUERY DEVN(6400)
14.27.58 JOB04573 ANTP0090I CQUERY FORMATTED LVL 4 220
220 VOLUME REPORT
220 ************** PPRC REMOTE COPY CQUERY - VOLUME ********************
220 * (PRIMARY) (SECONDARY) *
220 * SSID CCA LSS SSID CCA LSS*
220 *DEVICE LEVEL STATE PATH STATUS SERIAL# SERIAL# *
220 *------ --------- ---------- ----------- --------- --------- *
220 * 6400 PRIMARY.. DUPLEX.... ACTIVE.. 2700 00 00 2700 01 00 *
220 * CRIT(NO)....... CGRPLB(NO). 000000063515 000000063515*
220 * INCRES(NO). *
220 * PATHS SAID DEST STATUS: DESCRIPTION *
220 * ----- --------- ------ ------------------- *
220 * 1 FFFF FFFF 01 PATH ESTABLISHED... *
220 * ---- ---- 00 NO PATH............ *
220 * ---- ---- 00 NO PATH............ *
220 * ---- ---- 00 NO PATH............ *
220 * SUBSYSTEM WWNN LIC LEVEL *
220 * ----------- ---------------- ----------- *
220 * PRIMARY.... 0000000000000000 80.9.6.255 *
220 ********************************************************************
14.27.59 JOB04573 ANTP0001I CQUERY COMMAND COMPLETED FOR DEVICE 6400. COMPLETION CODE: 00
Figure 7-10 Example of CQUERY Command