Hitachi ShadowImage for IBM z/OS User"s Guide (T5213-96002, June 2007)

Performing ShadowImage for z/OS Operations Using Storage Navigator 5-35
Hitachi ShadowImage™ for IBM
®
z/OS
®
User’s Guide
– Capacity(Cyl): The volume capacity in cylinders is displayed.
• The Pair Information box displays the following information:
– S-VOL: The S-VOL information is displayed in XX:YY:ZZ (LDKC
number:CU number:LDEV number) format.
– T-VOL: The T-VOL information is displayed in XX:YY:ZZ (LDKC
number:CU number:LDEV number) format.
– Status: The status of the pair is displayed. For detailed information
about the pair status, see Table 2-1.
– Sync.: The rate of synchronization of the S-VOL and the T-VOL.
– CTG: The consistency group ID will be displayed when the pair is
registered to the consistency group. If the pair is not registered in the
consistency group, --- will be displayed.
– CLPR(S): The information of the CLPR where the S-VOL belongs will be
displayed in AA:BBB (CLPR number:CLPR name) format.
– CLPR(T): The information of the CLPR where the T-VOL belongs will be
displayed in AA:BBB (CLPR number:CLPR name) format.
• Refresh the window after this dialog box is closed. check box: If you
select the check box, the information displayed in the Pair Operation
window will be updated after the Detail dialog box closes. If you do not
select the check box, the information in the Pair Operation window will be
the same before and after you close the Detail dialog box.
• The Refresh button updates the setting to the latest information displayed
on the Detail dialog box.
• The Close button closes the Detail dialog box.