Hitachi ShadowImage for IBM z/OS User"s Guide (T5213-96002, June 2007)

5-26 Performing ShadowImage for z/OS Operations Using Storage Navigator
Hitachi ShadowImage™ for IBM
®
z/OS
®
User’s Guide
Note: You must click Apply on the Pair Operation window to apply the
Suspend Volume Pair operation setting(s) displayed in the Preview List to
the storage system.
• The Cancel button cancels the operations set in the Suspend Volume Pair
dialog box and closes the dialog box.
To suspend one or more SIz pairs:
1. Go to the Pair Operation window, and select the desired CU image or S-
VOL in the Tree to filter the volumes displayed in the Volume List.
2. Select the pair(s) that you want to suspend (or the volume(s) whose pairs
you want to suspend), right-click the selected pairs to display the pop-up
menu, and then select the Suspend Pair command to open the Suspend
Volume Pair dialog box.
3. On the Suspend Volume Pair dialog box, select the pair(s) you want to
suspend, and click OK to reflect the settings to the Preview List on the
Pair Operation window.
Note: To remove pair(s) from the list, select the unnecessary SIz pair(s),
right-click while selecting the pair(s), and then select the Delete command
from the pop-up menu that will be displayed by right-clicking.
4. Repeat steps 2 and 3 to suspend additional pairs in the Suspend Volume
Pair Volume List.
5. On the Pair Operation window, click Apply to suspend the specified pair(s).
The Pair Operation window will then display the result(s) of the suspend
operation(s) (i.e., pair status changed to Suspend).