Hitachi ShadowImage for IBM z/OS User"s Guide (T5213-96002, June 2007)

Performing ShadowImage for z/OS Operations Using Storage Navigator 5-25
Hitachi ShadowImage™ for IBM
®
z/OS
®
User’s Guide
Suspending Pairs
The Suspend Volume Pair dialog box (see Figure 5-7) allows you to suspend
the pair(s).
Figure 5-7 The Suspend Volume Pair Dialog Box
The Suspend Volume Pair dialog box consists of the following components.
• Suspend Volume Pair Volume List
The Volume List located on the upper side of the Suspend Volume Pair
panel displays the following information pertaining to the S-VOL and T-VOL
of the pair you want to suspend:
– S-VOL: The LDKC:CU:LDEV of the S-VOL.
Note: An LDEV number that ends with a “#” mark indicates that the
LDEV is an external volume (e.g. 00:00:01#). For details regarding the
external volumes, see the Universal Volume Manager User’s Guide.
– Status: The pair status is displayed.
– T-VOL: The LDKC:CU:LDEV of the T-VOL.
Note: An LDEV number that ends with a “#” mark indicates that the
LDEV is an external volume (e.g. 00:00:01#). For details regarding the
external volumes, see the Universal Volume Manager User’s Guide.
– Emulation: The emulation type of the S-VOL and T-VOL.
– Capacity(Cyl): The number of cylinders assigned to the volume.
– CLPR(S): The cache logical partition of the S-VOL.
– CLPR(T): The cache logical partition of the T-VOL.
• The OK button adds the operation setting(s) to suspend the selected
pair(s) displayed in the Suspend Volume Pair Volume List to the Preview
List on the Pair Operation window.