Hitachi HPAV for z/OS user guide (HITA737-96006, June 2008)
Table Of Contents
- Contents
- Compatible PAV Function for the XP1024/XP128/XP12000/XP10000
- Overview of Compatible PAV Operations
- Preparing for Compatible PAV Operations
- Performing Compatible PAV Operations
- Monitoring Compatible PAV Activities
- Additional MVS Commands
- GTF I/O Tracing
- Figure 13 Sample Output of Display Command - Compatible PAV Base Device with 5 Aliases
- Figure 14 Sample Output of Display Command - Compatible Hyper PAV with 16 Aliases
- Figure 15 DEVSERV DISPLAY PATHS Command
- Figure 16 Sample DEVSERV QPAV Command (Compatible PAV)
- Figure 17 Sample DEVSERV QPAV Command (Compatible Hyper PAV)
- Figure 18 Sample Output of DEVSERV QPAV,SSID=xxxx Command (Compatible PAV)
- Figure 19 Sample Output of DEVSERV QPAV,SSID=xxxx Command (Compatible Hyper PAV)
- Figure 20 Sample Output of DS QP,xxxx,VOLUME Command (Compatible PAV)
- Figure 21 Sample Output of DS QP,xxxx,VOLUME Command (Compatible Hyper PAV)
- Figure 22 Sample Output of D IOS,HYPERPAV Command
- Using HCD to Define and View XP1024/XP128/XP12000/XP10000 LCUs and Compatible PAV Devices
- Using HCD to Define an XP1024/XP12000/XP10000 LCU and the Base and Alias Devices
- Figure 23 Basic HCD Panel
- Figure 24 Define, Modify, Or View Configuration Data
- Figure 25 Add Control Unit Panel
- Figure 26 Selecting the Operating System
- Figure 27 Select, Change Option
- Figure 28 Control Unit Chpid, CUADD, and Device Address Range Addressing
- Figure 29 Define, Modify, Or View Configuration Data
- Figure 30 I/O Device List
- Figure 31 Add Device
- Figure 32 Device / Processor Definition Panel - Selecting the Processor ID
- Figure 33 Define Device / Processor Panel
- Figure 34 Define Device to OS Configuration Window - Selecting the OS Configuration
- Figure 35 Select / Disconnect Option
- Figure 36 Define Device Parameters / Features
- Displaying Compatible PAV Device Parameters
- Using HCD to Define an XP1024/XP12000/XP10000 LCU and the Base and Alias Devices
- Checking the WLM PAV Settings
- Settings about Compatible Hyper PAV
- Index
HPAV for z/OS user guide for the XP128/XP1024/XP12000/XP10000 7
About this guide
This guide provides information about the following:
• ”Overview of Compatible PAV Operations” on page 15
• ”Preparing for Compatible PAV Operations” on page 23
• ”Performing Compatible PAV Operations” on page 27
• ”Monitoring Compatible PAV Activities” on page 33
• ”Using HCD to Define and View XP1024/XP128/XP12000/XP10000 LCUs and Compatible PAV
Devices” on page 39
• ”Checking the WLM PAV Settings” on page 53
• ”Settings about Compatible Hyper PAV” on page 57
Supported storage platforms and firmware
In this guide, the term array refers to the following storage platforms:
• HP StorageWorks XP12000 Disk Array
• HP StorageWorks XP10000 Disk Array
• HP StorageWorks 200 Storage Virtualization System
For information about required firmware versions, see the HP StorageWorks XP Remote Web Console user
guide for XP12000/XP10000/SVS200.
Intended audience
This guide is intended for customers and HP authorized service providers experienced with the following:
• Disk array hardware and software
• Storage systems
Prerequisites
Prerequisites for using this product include:
• Installation of the license key for this product
• Set up the HP StorageWorks XP disk arrays
Related documentation
In addition to this guide, please refer to other documents for this product:
• HP StorageWorks Command View XP User Guide for XP Disk Arrays
• HP StorageWorks XP Remote Web Console User Guide for XP12000/XP10000
• HP StorageWorks XP Remote Web Console User Guide for XP1024/XP128
For HP StorageWorks documents , see the HP website: http://www.hp.com/support/manuals
.