XP10000 (HITA737-96003, March 2007)

HPAV for z/OS user guide for the XP128/XP1024/XP12000/XP10000 27

Example: DS QP,8300,VOLUME Command

Using HCD to Define and View XP1024/XP128/XP12000/XP10000

LCUs and HPAV Devices

The XP1024/XP128/XP12000/XP10000 logical control units (LCUs) and PAV base and alias devices are

defined to MVS/ESA and OS/390 systems using the configuration dialog windows of the Hardware

Configuration Definition (HCD) Program. The HCD Program can also display the WLMPAV device

parameter for existing HPAV devices.

This section provides sample instructions for:

• Defining an XP1024/XP12000/XP10000 LCU and base and alias HPAV devices (see page 27)

• Displaying the WLMPAV device parameters (see page 36)

Using HCD to Define an XP1024/XP12000/XP10000 LCU and the Base and Alias

Devices

The following example shows the sequence of HCD windows used in defining an

XP1024/XP12000/XP10000 LCU and a range of base and alias devices. Before you can define the LCU,

the channel paths must already be defined.

To define an XP1024/XP12000/XP10000 LCU and the base and alias address range that it will support,

use the following example for HCD:

1. From an ISPF/PDF primary options menu, select the HCD option to display the Basic HCD window. On

this window, verify the name of the IODF or IODF.WORK I/O definition file to be used.

2. From the Basic HCD window, select option 1 to display the Define, Modify, or View Configuration Data

window (see the following example).

DS QP,8300,VOLUME

IEE459I 16.00.15 DEVSERV QPAVS 041

HOST SUBSYSTEM

CONFIGURATION CONFIGURATION

------------- --------------------

UNIT UNIT UA

NUM. UA TYPE STATUS SSID ADDR. TYPE

---- -- ---- ------ ---- ---- ------------

8300 00 BASE 8300 00 BASE

83FB FB ALIAS-8300 8300 FB ALIAS-00

83FC FC ALIAS-8300 8300 FC ALIAS-00

83FD FD ALIAS-8300 8300 FD ALIAS-00

83FE FE ALIAS-8300 8300 FE ALIAS-00

83FF FF ALIAS-8300 8300 FF ALIAS-00

**** 6 DEVICE(S) MET THE SELECTION CRITERIA