HP Remote Graphics Software 5.4.8 User Guide

To set the LAN characteristics for a 100 Mb/sec connection running full-duplex mode, as root,
type:
$ /usr/local/sbin/ethtool -s eth0 speed 100 duplex full autoneg off
If you are not satisfied with your network performance, look at the log files on your network switch (if
the Local Computer is connected to one). A significant number of errors on the switch port may indicate
that the computer or network is not configured correctly. Work with your IT organization to optimize
your computer and network configuration.
230 Chapter 11 Optimizing RGS performance