HP Remote Graphics Software 5.4.8 User Guide

Receiver and Sender logging
Both the RGS Receiver and the RGS Sender have the ability to log various types of information to files
during their operation. Receiver logging can be enabled from the Receiver Control Panel, while Sender
logging is controlled by a file on the RGS Sender. Both types of logging are described below.
Receiver logging
The RGS Receiver logs various types of information during its operation. The Receiver Control Panel
Logging tab allows you to set a number of the logging parameters, such as whether logging is
enabled and the location/name of the log file(see
Figure 6-34 Options available under the Logging tab
on page 167).
Figure 6-34 Options available under the Logging tab
The options available under the Logging tab are:
●
File logging—Enables logging to the specified Log File. The spinbox for Max logfile size limits
the maximum logfile size.
●
Log level—Determines the level of information that is logged. For example, if WARN is selected,
the log file will contain information of type WARN and below, that is, WARN, ERROR, and
FATAL. To log all information generated by the Receiver, select DEBUG.
NOTE: In order to log Remote Clipboard activities on the Receiver, DEBUG-level logging must
be selected.
●
Clear Log—Clears the contents of the log file.
●
View Log—Displays the contents of the log file in a window.
●
Restore Defaults—Resets all logging settings to default values.
Receiver and Sender logging
167