HP Remote Graphics Software 5.4.8 User Guide

If the HP Remote Virtual USB driver is not reported, reinstall the RGS Sender software. During
installation, verify that the Remote USB box is checked in the Configuration window (see
Figure 6-21
Enable installation of remote USB on page 147).
Figure 6-21 Enable installation of remote USB
USB device drivers and program support
Verify that the device drivers and programs required by the device are installed and available on the
Sender system. Many USB devices require manufacturer-supplied software to work on a system. This
software must often be installed before the USB device is connected to the system.
Remote USB operation
147