HP Remote Graphics Software 5.4.8 User Guide

http://www.linux-usb.org/usb.ids
The registered classes and subclasses are documented by the USB Device Working Group (DWG). The
latest document from DWG for 1.0 defined class codes is hosted at:
http://www.usb.org/developers/defined_class
Troubleshooting remote USB
If you have problems connecting a remote USB device from a Local Computer to a Remote Computer,
the following checklist may help identify the problem.
Computers supporting remote USB
Ensure that both the Remote Computer and the Local Computer support remote USB— see
Computers
supporting remote USB on page 36.
Supported USB devices
Verify that the USB device you’re using is supported. HP has tested a number of USB devices to verify
they work correctly when attached to a Remote Computer from a Local Computer.
Enable Remote USB
Verify that Remote USB is enabled under the USB option tab of the Receiver Control Panel (see Figure
6-19 Checkbox to enable Remote USB on page 145).
Figure 6-19 Checkbox to enable Remote USB
Remote USB operation
145