HP Remote Graphics Software 7.0

Setting properties on the command line
Properties can be set on the command line like in the following examples:
Windows: rgreceiver.exe -Rgreceiver.Network.Timeout.Warning=10000
Linux: rgreceiver.sh -Rgreceiver.Network.Timeout.Warning=10000
NOTE: Properties of the type int vector cannot be set on the command line.
RGS Receiver properties
There are two types of RGS Receiver properties:
●
Global properties—The global properties affect all RGS connections. See
RGS Receiver global
properties on page 78 for detailed information about these properties.
●
Per-session properties—The per-session (per-connection) properties allow the user to specify
settings for each individual RGS connection. For example, in a many-to-one configuration, per-
session properties can be specified for each Remote Display Window displayed by the RGS
Receiver. See
RGS Receiver per-session properties on page 85 for detailed information about
these properties.
RGS Receiver property setting hierarchy
In this hierarchy, properties set by methods higher on the list override properties set by methods
lower on the list (with 1 being the highest and 5 being the lowest):
1. Properties set in the RGS Receiver Control Panel
2. Properties set on the command line
3. Properties set in the RGS Receiver configuration file
4. Property settings retrieved from an archive file
NOTE: Properties set using the RGS Receiver Control Panel are saved in an archive file when
the RGS Receiver is closed.
5. Default settings
TIP: All RGS Receiver properties can be restored to their default values by uninstalling and
reinstalling the RGS Receiver.
RGS Receiver global properties
Remote Display Window properties
Table 9-1 Remote Display Window properties
Rgreceiver.IsBordersEnabled
1=Borders are enabled on the Remote Display Window (default).
0=Borders are disabled on the Remote Display Window.
Rgreceiver.IsSnapEnabled
1=The Remote Display Window will snap when close to the top or left edge of the screen (default).
0=Snapping is disabled.
78 Chapter 9 RGS properties