HP Remote Graphics Software 7.0

Table 9-16 RGS Sender properties (continued)
This property sets the amount of time in milliseconds that the RGS Sender will wait before disconnecting all USB devices if
the USB ACL file disappears or becomes inaccessible. The default is 5000 milliseconds (5 seconds). If the file is restored
prior to expiration of the timeout period, the USB devices remain connected.
Rgsender.Clipboard.IsEnabled
1=Enables Remote Clipboard (default).
0=Disables Remote Clipboard.
Rgsender.IsClassicEasyLogonEnabled
1=Enables the classic Easy Login mode, which is the implementation and interface last used in RGS 4.
0=Disables the classic Easy Login mode (default).
Rgsender.Audio.IsEnabled
1=Enables Remote Audio (default).
0=Disables Remote Audio.
Rgsender.Mic.IsEnabled
1=Enables Remote Microphone (default).
0=Disables Remote Microphone.
Rgsender.CollabUI.Dialog.Timeout
This property sets the amount of time in milliseconds that the collaboration authentication dialog is shown. The default is
15000 milliseconds (15 seconds). After that amount of time, the collaboration request is denied.
Rgsender.RequestFloorControlTime
This property sets the delay in milliseconds after the active user stops making inputs before another user can take control of
the floor in a collaboration session. The default is 500 milliseconds (0.5 seconds), which is the minimum accepted value. The
maximum is 15000 milliseconds (15 seconds).
Rgsender.Collaboration.AlwaysAcceptCollaborators
1=Collaborators will always be accepted without having to be authorized by the primary user.
0=Collaborators will have to be authorized (default).
90 Chapter 9 RGS properties